When it comes time for you to start maintaining and fixing your own plumbing, you may wonder where to begin. There are so many things to consider when purchasing tools and equipment and when following regulations and instructions. This article can show you what is needed to get the job done and how to do it properly.
You can easily fix noisy pipes. Those pipes will need to be anchored if they are exposed. Call a plumber to help with pipes that require you to cut a hole in a wall, ceiling or floor.
Septic Tank
Ensure that a septic tank is emptied approximately five yearly, and make sure it is properly maintained. Septic systems can back up when the septic tank builds up sediment. This can even result in the septic system failing altogether. It is a small price to pay now to keep your septic in good working order and prevent having to pay for a major repair caused by a backup.
Check for softness in your floor to determine flood damage. Sit on your toilet and sway across both feet to feel if there are any spots less firm than the others. You could save yourself money but noticing that problem sooner, rather than later.
Try to have all your plumbing repairs done at once. You might be tempted to have a plumber come out for every little thing that happens, but kicking the can on some issues until you have a list means you can save a few bucks. It also costs less because most plumbers will charge you per hour and include a minimum rate for coming out. If you call them out multiple times, those charges for them coming out will add up quickly.
Ensure overflow holes have not been clogged. Sinks use overflow holes if they start to overfill, and this isn’t usually a problem, but it can be. Clear the overflow holes periodically when you are doing your periodic checks for other problems and things that need to be repaired.
Flush your drain with a constant stream of cold water when operating your drain mounted disposal unit. Using cold water not only preserves the sharpness of the blades, but also makes the disposal process itself smoother. Running hot water down the drain while you are using the garbage disposal can cause the drain to clog from any grease that is in there liquefying.
Shower Heads
One easy way to save on energy and water is to install efficiency-oriented shower heads. A lot of the hot water that we use is used when we shower. If you spend several extra dollars putting in energy-saving shower heads, you can potentially reduce your energy bill by $100 or more annually for every shower head used in your home.
Having water leaking into the dishwasher, however annoying, is luckily an easy fix. The hose that runs from the kitchen sink to the dishwasher is not installed properly, and can be corrected quickly. The hose leading from the kitchen sink to the dishwasher must lead uphill and then back downhill in order to prevent mixing of water from both devices.
When you replace your shower head, be sure that the replacement head is high quality. Some people think they can get away with the cheapest version at the store. Cheap shower heads are not well-made and are very likely to break. Buying a cheap shower head will end up costing you more money over the long-term.
Applying prevention measures is key to preventing plumbing issues. Drain clogs are probably the most frequent issue you will run into with your plumbing. This is because pipes can retain and trap hair, and other particles, very easily. Put drain covers over your bathtub and sink drains to keep loose hair from going down the drain or into your pipes. Cleaning hair from the screen is a much easier affair than it would be to get the hair out of the pipe.
Garbage Disposal
Don’t run the water when the garbage disposal is used. It is popular belief that running water will help the garbage disposal work, but this is mistaken. It can even cause what you put down the disposal to stick, causing damage to the unit.
If possible, try not to use drain cleaners. The chemicals in those kinds of drain cleaners can be corrosive and might damage pipes if you keep using them. If you do have a clogged drain, it is better to hire a professional to see what is causing it.
If you have to take out a clean-out plug but you aren’t having any success, two ways can assist you in doing this. You can loosen the fitting with a hammer and a chisel. If the plug itself is expendable, chiseling it into pieces and extracting them can work, too.
If you need a good plumber, make sure you check out their reviews. Some plumbers are not experienced enough or skilled enough to handle some jobs, and they can worsen your problem. Always look at plumber reviews, or ask friends and family if they can recommend one.
Check your faucets outdoors for drips before the first winter freeze. If they are, it is necessary to repair them before the arrival of freezing temperatures. Regardless of the material of your particular pipes, whether it be copper, steel or plastic, water pressure from freezing water will cause pipes to crack. Even the tiniest of cracks can release enough water to cause water damage or flooding to your home.
Take the time to ensure that everyone in your family knows how to cut off the water from the valve in your home. There should be a water meter either on it or possibly close by. Look for additional cut-off valves for you indoor equipment, such as toilets, sinks or any other water source. You will want to make your family aware of the location of each valve, and add markings that give directions on how to shut each one off whenever an emergency arises.
As you now know, dealing with plumbing is not as hard as you may have thought. There are just many basics to learn. You can handle any plumbing job armed with the right research, the will to work and common sense.